Loading... Please wait...

XTREME MJ survives Hurricane Irma! Read one customer's experience (September 2017):
"We've owned a Bad Boy (Xtreme) MJ for about 3 years now, and it has been a highly valuable device on board. We've got it installed at the top of the mast, riveted in on the provided L bracket. We are located in St Maarten where we recently took a huge Category 5 direct hit with over 200MPH/360KPH winds. I'm happy to report the Bad Boy, with antenna, is still mounted at the top of the mast. Suffice to say, your product is pretty robust. Thanks again!" - Derek, s/y ARAVILLA

If you can find a better price for a complete system similar to Xtreme, we will better it by 10%!
Practical Sailor "We think it’s a good value for a high-quality product"   Read...
  • Shiny White Fiberglass with Bright Stainless Steel Base and Cap
  • Antenna Rail Mounted
  • Antenna Backstay Mounted

Omni-Directional Antenna - N-Female Connector, Fiberglass & Stainless Steel


Product Description

This antenna is specially designed and therefore ideally suited for the BAD BOY Xtreme models for connecting to Wi-Fi hotspots. We spent many months researching and fine tuning our antenna design to produce the highest quality, longest range antenna possible. Specially designed for Bitstorm, the dispersion pattern provides the best of what's needed: long range capability and rock solid, drop out free connections.


  • Compact, lightweight design, all weather operation
  • Durable UV-stable fiberglass radome
  • High polish stainless steel connector, base and cap
  • Sealed construction 
  • -40°F to 185°F (-40°C to +85°C)
  • Survives wind speeds greater than 150 MPH (240 KPH)
  • Integral N-Female connector

 High Performance

The antenna is a high performance omni-directional Wi-Fi antenna designed specially for the BAD BOY Xtreme. These compact and lightweight antennas are ideally suited for IEEE 802.11b/g/n public Wi-Fi hotspot access where wide coverage is desired.


This antenna features an integral N-Female bulkhead type connector.

All Weather Operation

Constructed for all weather operation, this antenna features collinear brass elements inside a durable UV-stable white fiberglass radome. The antenna is sealed to prevent moisture ingress. These features allow this antenna to be mounted in up or down positions.


  • White antenna with high polish stainless steel fittings
  • Stainless steel mounting washer and nut
  • NOTE: Mount not included - see mounts here

Optional Mounts

Dispersion Pattern



2.400-2.500 Ghz
8 dBi
Vertical Beam Width:
Horizontal Beam Width:
50 Ohms
Max. Input Power:
100 W
< 1.5:1 avg.
.33 lbs. (160 g)
16 in. (410 mm)
Base Diameter:
.75 in. (19 mm)
Radome Diameter:
.64 in. (16 mm)
Radome Material:
Shiny white fiberglass w/stainless stell base and cap
Wind Survival:
>150 MPH (>240 KPH)
Operating Temperature:
-40°F to 185°F (-40°C to 85°C)
Bulkhead type integral N-Type female
RoHS Compliant:

Product Reviews

Write Review

Previous | Showing reviews 6-7 of 7

  1. Fantastic

    Posted by Andrew Obee on 30th Jun 2014

    A great product. Very stable, great gain on the antenna, weather resistant, and easy to use. I highly recommend it to anyone.

  2. More Thread

    Posted by Carl. on 5th Nov 2012

    Nice antena ,But. the space were the mounting bracket goes is only .043 1/16 thick .this dident work well ,since the bracket i had made was .250 1/4 inch thick . this made for a lot off grinding to make it fit .

Previous | Showing reviews 6-7 of 7

1.00 LBS
In stock, available for immediate shipment
Calculated at checkout


Recent Updates

Connect with us